Window Graphics Installation: Storefront Install Guide

Which Window Graphics Can Be Installed?

In San Antonio, the crew installs the window work storefronts ask for most:

• Perforated film across a full pane, for branding and privacy with a view out.
• Printed window vinyl, for logos, graphics and lettering on part of the glass.
• Frosted film, for privacy bands and frosted logos.
• Blackout film, to block a view completely.
• Cut lettering, for hours, names and phone numbers.

The installs and services page lists every installed service, and the San Antonio location page covers where the crew works. Wall and floor graphics are installed there too.

How Should You Prepare the Storefront?

Clear the glass before installation day. Remove old decals, tape residue and signs, or tell the crew they need to come off so time is planned for removal. Clean both sides of the glass the day before.

Clear the inside sill and the floor in front of the window, so there is room to work. Move displays and furniture back from the glass.

Plan for the business to stay open. Window work can often be done with the store running; a sidewalk side install needs a clear path for customers, which is easier early in the day.

What Happens on Installation Day?

On installation day the glass is cleaned again, the film is positioned and leveled, and each panel is applied from the top down with a squeegee, then trimmed to the edge of the glass. Seams between panels on a large pane are lined up so the design reads as one image.

When the film is on, check the edges and the seams together, and look at the window from the sidewalk and from inside before the crew leaves.

Perforated film shows the graphic from the brighter side. In daylight, people outside see the design and people inside see out. At night with the lights on inside, the effect reverses, so expect to see the interior from the street after dark.

What If You Are Outside San Antonio?

Outside San Antonio, order the printed film, and apply it yourself or hire a local sign or wrap installer. Every order ships for a flat $10 per product to any US address, with the same proof and the same 48 hour production.

For smaller pieces, such as a glass door decal or store hours, doing it yourself works well with the hinge method. For large storefront panes of perforated film, a local installer with experience on glass is worth the cost.

Send your installer the measurements and photos you took before ordering, plus the proof. They will know exactly what is coming.

How Do You Plan the Design Across Several Panes?

Plan the storefront as one picture, then split it into panes. Sketch the front of the building with every pane and frame bar drawn to scale, and place the design on top. A logo or a face should sit inside one pane, not across a frame bar where it gets cut in half.

Give each pane a job. The pane beside the door often carries hours and the name. A large center pane can carry a photo or the main message. Side panes can carry a pattern or a color band that ties the front together.

Keep the door clear at eye level. People need to see into the store and see the glass itself. A small logo decal or hours on the door, with the larger graphics on the fixed panes, works for many storefronts.

When Should You Choose Frosted or Blackout Film?

Choose frosted film when you want privacy and light. It turns clear glass into a soft white surface that lets daylight in while hiding detail, which suits offices, clinics, salons and back rooms. A frosted band at eye height, or a frosted logo cut into clear glass, looks clean and finished.

Choose blackout film when you need to block the view completely, such as a storage room, a window behind shelving, or a space under renovation. It is often paired with a printed graphic on top, so the window shows a message instead of a dark rectangle.

Choose perforated film when you want a full color image across the pane and a view out from inside. In San Antonio, the crew installs all three; outside San Antonio, the printed perforated film and decals ship nationwide.

How Do You Care for Installed Window Graphics?

Clean installed window graphics gently, with a soft cloth or sponge and a mild glass cleaner without ammonia. Do not use a scraper or a razor on the film, and do not pressure wash the edges.

Perforated film can trap water in its holes after rain or cleaning, which can blur the view out for a while. It clears as it dries. A laminated version adds a protective layer over the print.

What Should You Check on Storefront Proofs?

Check first for fine text on perforated film. The holes break up small letters, so names and messages need to be large and bold to read from the sidewalk.

Next, check for a design that ignores the window frame. Mullions and door frames cut through the glass, and a face or a word that crosses a frame bar gets split. Lay out the design around the frames.

Also check for mixing up panes. Number each pane in your photos and on the order, so the right graphic goes on the right glass.

How Do You Order Window Graphics Installation?

Send measurements and photos for each pane, choose the film, and approve the proof. The film prints in 48 hours after approval. Artwork prep is $14.99 per item if you send a phone photo or a ChatGPT image, and a free proof comes with every order.

In San Antonio, request installation through the window graphics service page, and the install is scheduled once the film is printed. Everywhere else, the film ships for a flat $10 to any US address, ready to apply.