Yard Sign Placement for Traffic, Corners and Stakes

Where should a yard sign face?

Place a yard sign facing traffic, at the spot where a driver decides, with the panel above the grass. One 18 x 24 in double-sided 4mm coroplast yard sign from Inline Graphics is $64.19, and a standard wire H-stake is $3.00. Flat $10 shipping per product.

A second stream of cars needs a second printed face. When traffic comes from both directions, order the sign double sided so neither side is a blank back. One 18 x 24 in double-sided 4mm coroplast sign is $64.19 before the stake. A single-sided 24 x 18 in sign on the custom page is $53.49, and it only serves the direction you turn it toward.

Turn the printed face toward the drivers who should read it, and put that face where they still have a choice to make. A sign planted after the driveway, or after the entrance, is a sign those drivers have already passed. A sign at the decision, with the face aimed at the approach, is the one that gets used.

An open house route is a different placement job. The count is one sign at the house and one at each turn, and that guide is open house sign placement. Use it for a weekend route. This page is for a sign that stays at one address: a listing, a campaign, a church, a sale, or a business.

Size changes how much you can put on the face, not where the face should point. The yard sign size guide compares 12 x 18, 18 x 24, 24 x 24, and 36 x 24 in. Pick the rectangle before you write a paragraph. A driver does not read a paragraph.

How high should the panel sit, and how far apart?

Set the panel so the bottom edge clears the grass. Words buried in the lawn are words nobody reads from the street. The wire H-stake is what holds a coroplast panel up. Push it in straight so the sheet stands upright instead of leaning into the sidewalk or the curb. We do not publish a measured height off the ground. The test is simple: from the driver's seat, the whole message is visible, and the panel is not in the walking path.

Space signs so each one can be read on its own. We do not publish a distance between signs, and a guessed gap would be the wrong rule for the next block. A common mistake to avoid is stacking several signs on the closest corner. They hide one another, and the earlier decision points stay blank. One readable sign at the choice beats three signs fighting on the same patch of grass.

Look at the spot from the approach, not from the porch. A bush, a parked car, or a trash cart in front of the panel removes the sign even when the stake is perfect. If the spot is blocked, move the sign. Do not add a second copy in the same hole.

What should you keep out of a driver's view?

Keep the panel out of the sight line at a corner and out of the view from a driveway. A sign that blocks cross traffic, or that hides a car pulling out, is in the wrong place even if the words are large. Keep it off the sidewalk. People walking to the door should not have to step around the stake.

Do not fasten a yard sign to a utility pole, a traffic sign, a signal pole, or a streetlight. Those objects are not a free stand, and a sign stuck to them can hide a signal or a street name. Plant the H-stake in ground where you have permission, with the panel clear of the lane.

Look before you push the stake. A stake that hits a sprinkler head or a shallow line becomes a repair. If the ground is too hard or too rocky, that corner needs a different spot, not a harder swing. Bring the sign in when its job is over. A dated panel left up after the event points people at something that is finished, and some cities and associations limit how long a temporary sign may stay.

Which placement rules should you read first?

Right-of-way rules, city codes, and HOA rules are not the same everywhere. A corner that is fine on one block can sit in the public right of way on the next. An association can limit the number of signs, the hours, and whether a sign may stand in a common area at all.

Campaign signs are a clear example of how a state transportation department treats the highway right of way. The California Department of Transportation outdoor advertising page is one example of a state agency that regulates signs along state highways. Read it as one state's example, then read your own state transportation department and your own city code. A real estate sign or a business sign can sit under a different local rule than a campaign sign. Check the rule for the kind of sign you are planting, and get the property owner's permission before you put a sign on someone else's land. This is general information, not legal advice.

Do not guess from a sign you saw on another street. If you are not sure a strip of grass is private, pick a spot you know you may use.

How do you keep a yard sign upright?

The sign-only pages do not include a stake. A standard wire H-stake is $3.00 each. A heavy-duty H-stake is $4.00 each on an order of 10 signs or more. For fewer than 10 signs, the published stake is the $3.00 standard. One 18 x 24 in double-sided sign plus one standard stake is $67.19.

Slide the upper prongs of the H-stake into the flutes at the bottom edge of the sign, then press the lower legs into the ground until the panel stands straight with its bottom edge above the grass. The stake cost guide covers sign-and-stake packs when you want the stakes in the same box. Those packs are a different product from a single custom sign plus an add-on stake. Match the product to how many signs you are actually planting.

Coroplast is 4mm corrugated plastic, UV printed, and rated for outdoor use. The site does not publish a number of months it will last. Sun, wind, and a loose stake are what wear a panel down. For a sign meant to stay up for years, aluminum is a different product. This page stays with coroplast and H-stakes.

How much do yard signs and H-stakes cost?

Start on custom yard signs. The page opens on a 24 x 18 in single-sided 4mm coroplast sign at $53.49. Stakes are separate on that price. The yard sign hub lists the stock sizes if you already know the rectangle.

A sign without a stake is not a sign you can plant. Add the $3.00 standard stake, or the $4.00 heavy-duty stake when the order is 10 signs or more, before you compare totals. We do not sell metal frames, hanging posts, or sign posts.

How fast can you get the signs?

Production is the next business day after you approve the proof. Approve on a weekday before 12 PM Central and that approval counts the same day, so production starts the next business day. After noon, or on a weekend, it counts from the next business day. Ground transit is about 3 business days after production. We do not promise an arrival date, and we do not name a carrier.

There is no production setup fee. A file or image you already have goes through AI image to print for $14.99 per item. Design it for me is +$29.99 with two revisions, and that add-on is free when the item is $499 or more. A free digital proof comes after the order. Nothing prints until you approve it. On the proof, check which side faces which direction of traffic, and that the largest type is the line a driver needs.

Flat $10 ground shipping is per product. Two lines of yard signs are still one product, so they are still $10. Add a different product and that product has its own $10.

Need yard signs or other custom printing? Inline Graphics helps businesses, churches, schools, and event organizers across the country design and print cards, banners, signs, decals, displays, and marketing materials that get noticed. Contact us today for a quote.