ShippingFlat $10 shipping anywhere in the US*

X Banner Stand Cost: 24 x 63 and 32 x 71 in Graphic Sizes

Jean

October 12, 2026Updated October 16, 20268 min read

Navy X banner stand graphic for Ferrygate Tools standing beside a tool display table in a busy trade show aisle

How Much Does an X Banner Stand Cost?

An X-Stand with a 24 x 63 inch printed graphic is $117.69, stand, matte banner and nylon carry bag included. The larger 32 x 71 inch kit is $139.09, and a replacement graphic alone is $42.79. Printed in the USA the next business day after artwork approval and shipped nationwide, flat $10 shipping to any US address.

The X-Stand page opens on the smaller kit, and it is the lowest priced way we sell to get a full height graphic standing on its own. The price covers the X frame, the printed graphic with a grommet in each corner, a nylon carry bag that holds both, and a free digital proof with every order. Artwork is the one choice on top: AI image to print makes your image print ready for $14.99 once per item, or Design it for me builds it.

Every figure below is one unit with the options at their defaults: the Stand + Graphic build and the Matte Banner graphic. Change the size or the graphic stock and the price moves as shown.

X-Stand configuration Price
Stand + Graphic, 24 x 63 in, Matte Banner $117.69
Stand + Graphic, 24 x 63 in, Double White Popup $149.79
Stand + Graphic, 32 x 71 in, Matte Banner $139.09
Stand + Graphic, 32 x 71 in, Double White Popup $171.19
Graphic Only, replacement print, either size $42.79
Two 24 x 63 in kits $224.69
Three 24 x 63 in kits $331.69

Shipping is a flat $10 per order to any US address, on top of the kit price.

Cream X banner stand graphic for Sunderwick Market on its black X frame, shown straight on against a white studio background with a grommet at each corner

What Size Graphic Does an X Stand Take?

Our X-Stand takes a 24 x 63 inch graphic or a 32 x 71 inch graphic, and the size you choose on the product page is the finished size of the print. The graphic is a tall, narrow panel, about 2 ft wide and a little over 5 ft tall on the smaller kit, and about 2.7 ft wide and 6 ft tall on the larger one.

Pick the 24 x 63 inch graphic for a stand that sits beside a table or a desk, where the reader is a few feet away and the headline lands near eye level. Pick the 32 x 71 inch graphic for a wide room or a long hallway, where the extra 8 inches of width is what lets the headline be read from the far side.

The print has a metal grommet in each corner. The frame has four arms, each ending in a rubber tipped hook, and a grommet drops over each hook. That tension is what holds the graphic flat, which is why the corners matter more than on any other banner: anything printed within 2 inches of a corner sits under or beside a grommet.

Build the file at the finished size, 24 x 63 inches or 32 x 71 inches, with the background running to the edge and every word, logo and number at least 2 inches in from the edges and 3 inches in from the corners.

What Is Included With the X-Stand Kit?

The Stand + Graphic kit includes a durable aluminum and fiberglass X frame, the printed graphic with its corner grommets, and a complimentary nylon carry bag that holds the hardware and the print. A free digital proof comes with every order before anything prints, and production is the next business day after you approve it.

Setup is the appeal. The frame opens, the four grommets drop over the four hooks, and the graphic stands. Taking it down is the same in reverse, and the whole kit rolls into the bag. The frame is light, which is what makes it the display for a lobby, a foyer, a booth, a registration desk or a shop entrance.

Where it works best: beside a registration desk, at the entrance to a sanctuary, inside a shop door during a sale, at the end of a trade show table, or in a hallway pointing people to a room. Give it a flat floor and a spot where people will not brush past it all day, and it stands for as long as you leave it.

Matte Banner or Double White Popup: Which Graphic?

Matte Banner is the included graphic and the right choice for most orders. Double White Popup is a $30.25 upgrade, which makes the smaller kit $149.79 and the larger kit $171.19, and the product page recommends it for color and for edges that do not curl.

Pick Matte Banner for a graphic that goes up for an event or a season and comes down. Pick Double White Popup for a graphic that will stand in a lobby or a showroom week after week, where a curled edge or a dull color is something a customer sees every day. Both come with the same corner grommets and hook onto the same frame.

How Much Is a Replacement X Stand Graphic?

A Graphic Only replacement print is $42.79, at either size, and it ships without the stand or the carry bag. It is the matte banner with corner grommets that hooks onto the frame you already own.

That is the second reason to buy an X stand. The hardware outlasts the message, and when the offer changes, the service changes or the season changes, a new graphic at $42.79 keeps the same frame working. Order Graphic Only on the product page, pick the size that matches your frame, and keep the old print rolled in the bag as a backup.

How Does an X Stand Compare With a Retractable Stand?

The X-Stand kit is $117.69 with a 24 x 63 inch graphic. The standard retractable banner stand costs more, carries a wider 33 x 81 inch graphic, and rolls that graphic into a base that protects it between shows.

Buy the X stand when the budget is tight, the graphic will stand indoors, and you may want to swap prints later. Step up to the roll-up stand when the display travels every month and needs the wider graphic to be read across a conference hall. Many booths run both: the roll-up stand at the back wall and an X stand at the aisle.

How Much Do Two or Three X Stands Cost?

Two 24 x 63 inch kits are $224.69, about $112.35 each, and three are $331.69, about $110.56 each. The per kit price eases a little at two and three, so a pair for both ends of a booth or a set of three for a lobby, a hallway and a registration desk costs less per stand than one.

Set the quantity to two or three on the product page when one graphic prints on all of them. If each stand needs a different message, order each one as its own line with its own file, and the two and three kit prices above apply only to a run of the same graphic.

What We See on Proofs for X Stand Graphics

The file shape we send back most is a phone story. A 1080 x 1920 pixel file is 9:16, the shape of a phone screen. The 24 x 63 inch graphic is closer to 3:8, a good deal narrower for its height. Set a story file on this panel and either the top and bottom fall off or the sides show empty bars, and neither is a proof we will approve without asking first.

The fix is to build the canvas at 24 x 63 inches, or 32 x 71 inches for the larger kit, before placing anything. The second thing we see is a logo pushed into the top corners, where the grommets sit. On this product the corners carry the tension, so keep the logo and the headline in the top third of the panel but 3 inches down from the top edge and 3 inches in from each side.

And give the stand a single job. One headline near the top at 4 inches tall or more, one supporting line, one logo, and a phone number or a short web address low on the panel. A list of twelve services in 1 inch type is unreadable from the aisle and gets skipped.

How to Order an X Stand

Open the X-Stand page, choose 24 x 63 inches or 32 x 71 inches, leave the build on Stand + Graphic unless you already own the frame, and leave the graphic on Matte Banner unless the stand lives in a showroom. Set the quantity to the number of stands.

Send your image through AI image to print for $14.99 once per item or ask for Design it for me, which is $29.99 with two revisions, then check the proof as if it were already in the aisle: the name, the phone number, the headline size, and nothing in the corners. Approve it, and production is the next business day. Shipping is a flat $10 to any US address on top of the $117.69 kit.

Frequently Asked Questions

An X-Stand kit with a 24 x 63 inch printed graphic is $117.69, and the kit with a 32 x 71 inch graphic is $139.09. Both include the stand, the matte banner graphic and a nylon carry bag. Production is the next business day after artwork approval and shipping is a flat $10 to any US address.

Our X-Stand takes a 24 x 63 inch graphic or a 32 x 71 inch graphic, and the size you pick on the product page is the finished print size. The graphic has a grommet in each corner and hooks onto the four arms of the frame. Build the file at the finished size and keep text clear of the corners.

The Stand + Graphic kits cost $117.69 and $139.09 and include the aluminum and fiberglass X frame, the printed graphic and a nylon carry bag that holds both. Graphic Only is the other choice, a replacement print for hardware you already own, and it ships without the stand or the bag.

A Graphic Only replacement print is $42.79 at either size. It is a new matte banner with corner grommets that hooks onto the X frame you already have, and it ships without a stand or carry bag. Order it when the message changes and the hardware is still sound.

Double White Popup is a $30.25 upgrade on the printed graphic, which makes the 24 x 63 inch kit $149.79 and the 32 x 71 inch kit $171.19. The product page recommends it for color and for edges that do not curl. The included Matte Banner is the standard graphic and is the right choice for most orders.

Production is the next business day after you approve the free digital proof included with every order, and shipping is a flat $10 to any US address. The production clock starts at approval, not at upload, so send the file a few days ahead of the event and allow shipping time on top.