SEG Display Sizes: Backlit vs Non-Lit, 3 ft to 20 ft
Daniel
October 31, 2026Updated November 5, 20267 min read


Should You Choose a Backlit or Non-Lit SEG Display?
A Non-Lit SEG Display, 10 ft with graphic, frame and bag is $974.99. No minimum, order just one display. Upload a logo, photo or ChatGPT image and we make it print ready at no charge on this item, with a free proof before printing. Printed in the USA in 3 to 4 business days and shipped nationwide, flat $10 shipping to any US address. Backlit SEG starts at $2,154.99 for an 8 ft pop-up, with fabric printed for backlighting.
Choose a non-lit SEG display when the venue is well lit and you want a seamless fabric backwall for the lowest price, and choose backlit when the room is dim, the booth sits among brighter neighbors, or the design depends on color that glows. Both use the same silicone edge fabric, both come single or double sided, and both are printed in 3 to 4 business days after artwork approval.
| Model | Size, W x H | Frame | Starts at |
|---|---|---|---|
| Non-Lit 3 ft | 33.45 x 78.75 in, 18 in deep | Slim aluminum | $364.99 |
| Non-Lit 10 ft | 118.1 x 88.6 in, 18 in deep | Slim aluminum | $974.99 |
| Non-Lit 20 ft | 236.2 x 88.6 in, 18 in deep | Slim aluminum | $1,779.99 |
| Backlit Pop-Up 8 ft | 88 x 88 in, 12 in deep | Collapsible pop-up | $2,154.99 |
| Backlit 10 ft | 118.1 x 88.6 in, 17 in deep | Slim aluminum | $2,364.99 |
| Backlit Pop-Up 10 ft | 118 x 88 in | Collapsible pop-up | $2,689.99 |
Each starting price is the complete kit, single sided: printed fabric graphic, frame and travel bag. Shipping is a flat $10 per design to any US address, and a free digital proof comes with every order.

What Is an SEG Fabric Display?
An SEG fabric display is a printed fabric graphic with a silicone edge, SEG for short, that presses into a channel around an aluminum frame. The fabric pulls tight and flat, so the face reads as one smooth wall with no grommets, clips or poles showing.
The silicone strip is sewn to the edge of the fabric. At setup you stand the frame, then work the strip into the channel around the perimeter. At takedown you pull it back out, fold the fabric and pack it with the frame in the travel bag.
Because the graphic and the frame are made for each other, a replacement graphic has to match the model and size of the frame. A backlit frame needs fabric printed for backlighting; a non-lit graphic in a lit frame will not look the same.


Which SEG Size Fits Your Booth?
Pick the width that matches the back of your booth space, then decide on lighting.
- 3 ft non-lit: 33.45 inches wide. A single tower beside a table, a lobby display or a matching pair framing a booth entrance.
- 8 ft backlit pop-up: 88 inches square. A lit wall for a booth that does not need the full 10 ft, or a lit feature inside a larger space.
- 10 ft, lit or non-lit: about 118 inches wide, which spans the back of a standard 10 ft booth.
- 20 ft non-lit: 236.2 inches wide, the back wall of a 10 x 20 ft inline space.
Check the depth too. The 18 inch deep frames stand on feet that take floor space at the back of the booth, so leave room for your table and chairs in front.
When Is Backlit Worth the Extra Cost?
Backlit is worth it when light is part of the message: a dim ballroom, an evening event, a hall where neighboring booths glow, or a brand whose colors carry the design. The fabric is printed for backlighting, so color reads evenly when the wall is lit from behind.
It also changes the plan. A lit display needs power at the booth, so ask the organizer how power reaches your space and order it when you book. Run the cord where nobody will trip on it.
When the hall is bright and the budget is tight, a non-lit 10 ft wall at $974.99 delivers the same seamless face for far less than the lit version.
Slim Frame or Pop-Up Frame?
Choose a slim aluminum frame for the cleanest look, and a pop-up frame when packing size and setup speed matter most. The non-lit models and the backlit 10 ft use slim aluminum frames. The backlit 8 ft and 10 ft pop-ups use a collapsible frame that folds down for travel.
The 8 ft pop-up frame packs down to 6.5 x 7 x 32 inches for travel, small enough to carry with the folded fabric in its bag. A team that drives to shows can work with either; a team that ships its booth or carries it through an airport will appreciate the smaller pack.
Single or Double Sided, and Graphic Only?
Every SEG model is offered single or double sided. Single sided is the right choice for a wall against the back of a booth. Double sided is for a wall that stands in the open, where the back faces an aisle or a room.
Every model also offers Graphic Only, a replacement fabric that ships without the frame or bag. When the message changes, a new graphic keeps the frame working. Order 2 or more displays and the price per display drops, and it drops again at 5 or more.
How Do You Set Up and Pack an SEG Display?
Set up the frame first, then the fabric. Stand the assembled frame upright where it will stay, start the silicone edge at one top corner, and press it into the channel along the top, then down each side and across the bottom. Working in that order keeps the fabric square and the logo level.
Two people make it easier on a 10 ft or 20 ft wall: one holds the fabric clear of the floor while the other seats the edge. Wash your hands or wear clean gloves before handling a light colored graphic, because fabric shows smudges.
At takedown, pull the edge out in the reverse order, fold the fabric loosely with the printed face in, and pack it in the travel bag away from frame parts with sharp ends. Keep a note of the model and size in the bag, so a replacement graphic years from now is an easy reorder.
How Should You Design Artwork for an SEG Backwall?
Design for what people see over the top of your table. Put the logo and one headline in the top half of the wall, where a table, a monitor or a person will not block them. Keep contact details at chest height or higher.
Run the background color all the way to the edges, so no white shows where the fabric meets the frame. On a backlit wall, solid areas of strong color glow evenly, and fine black text on a busy photo is harder to read once lit.
What to Check on Proofs for SEG Displays
Check for artwork built for the wrong shape. A 10 ft wall is wider than it is tall, roughly 4 to 3, and a file made for a 10 ft banner or a slide deck will not fit without empty bands or a cropped logo.
Next, check for important text at the bottom of the wall, which the table hides. Then check for a low resolution logo stretched across a 10 ft face. At that size every soft edge shows, so send a vector logo or the largest image you have, or use AI image to print for $14.99 per item and we make it print ready.
How Do You Order an SEG Display?
Open the product page from the table above, choose the complete kit or Graphic Only, then single or double sided, and set the quantity. Send your file, or ask for Design it for me at $29.99 with two revisions, free on items of $499 or more, which covers every 8, 10 and 20 ft kit.
Check the proof as if you were standing in the aisle: the name, the headline, the phone number and nothing important near the bottom edge. Then approve it. Production is 3 to 4 business days, and shipping is a flat $10 per design to any US address. Every display is printed in the USA and ships to all 50 states. For the rest of the booth, start with our trade show displays page.
Frequently Asked Questions
$974.99 buys a non-lit 10 ft SEG kit with the printed fabric, aluminum frame and travel bag. The non-lit 3 ft starts at $364.99 and the 20 ft at $1,779.99. Backlit models start at $2,154.99. Shipping is a flat $10 to any US address.
3 words: silicone edge graphics. A thin silicone strip is sewn around the edge of the printed fabric, and it presses into a channel in the frame. The fabric pulls tight and flat with no grommets, clips or visible hardware on the face.
6 models: non-lit 3 ft (33.45 x 78.75 in), 10 ft (118.1 x 88.6 in) and 20 ft (236.2 x 88.6 in), plus backlit 8 ft pop-up (88 x 88 in), 10 ft (118.1 x 88.6 in) and 10 ft pop-up (118 x 88 in).
2 sides are offered on every SEG model in the catalog, lit and non-lit. Choose Double-Sided on the product page and send a file for each face. A double sided wall makes sense in the middle of a room or at the end of an aisle, where people see the back.
1 Graphic Only build is listed on every SEG model. It is a replacement fabric for a frame of the same size and type, and it ships without the frame or the bag. A backlit frame needs a backlit replacement graphic.
2 or more displays lower the price per display, and 5 or more lower it again. The product page shows the price for the quantity you set before you add it to the cart.
Every SEG display is printed 3 to 4 business days after you approve the free digital proof. Shipping is a flat $10 per design to any US address, and transit time is on top.

Daniel
Print Specialist, Inline Graphics
Related Articles

Fabric Backwall Display Guide: 8, 9 and 10 Ft Booth Fit
An 8 ft fabric backwall comes in 8, 9, and 10 ft widths. Compare booth fit, frame and graphic [...]
Read More: Fabric Backwall Display Guide: 8, 9 and 10 Ft Booth Fit
10x10 Trade Show Booth: Print Costs Starting at $427.98
A 10x10 trade show booth can start at $427.98 for 2 printed pieces: a table throw and a [...]
Read More: 10x10 Trade Show Booth: Print Costs Starting at $427.98
Portable Trade Show Display Buying Guide: Sizes and Prices
Portable trade show displays start at $106.99 for a tabletop stand. Compare 8 portable displays [...]
Read More: Portable Trade Show Display Buying Guide: Sizes and Prices
Trade Show Booth Design Ideas: 10 Ways to Plan a 10x10
These trade show booth design ideas give a 10x10 space 10 concrete improvements. Plan readable [...]
Read More: Trade Show Booth Design Ideas: 10 Ways to Plan a 10x10