ShippingFlat $10 shipping anywhere in the US*

Retractable Banner Stand Cost: 23 x 66 to 47 x 81 in

Daniel

October 12, 2026Updated October 16, 20268 min read

A tall custom retractable banner stand displayed upright in a bright interior space

How Much Does a Retractable Banner Stand Cost?

A 33 x 81 inch Stand + Insert with UV Printed Fabric is $213.99. The kit includes aluminum hardware, two stabilizing feet, a printed insert, a complimentary travel bag, and a free digital proof with every order. Printed in the USA the next business day after artwork approval and shipped nationwide, flat $10 shipping to any US address.

The total depends on three selections: Stand + Insert or Insert Only, the finished size, and the insert material. The master table below compares complete Stand + Insert kits with LED LIGHT set to No, so every figure represents the same kind of order.

Five sizes and two insert selections create ten exact configurations. Use the same selection names shown on the product page when comparing a quote, cart, and proof. That keeps a complete kit from being confused with a replacement insert.

Stand + Insert size UV Printed Fabric UV Printed Matte Banner
23 x 66 in $213.99 $224.69
24 x 81 in $224.69 $224.69
33 x 81 in $213.99 $235.39
33 x 81 in (Black) $267.49 $267.49
47 x 81 in $331.69 $331.69

Use the complete configuration name when recording a quote: size, insert, and LED LIGHT choice. That keeps the dollar figure connected to the exact kit selected on the product page and prevents a stand package from being confused with a different product choice.

A complete silver retractable banner stand with a full-color printed insert and two stabilizing feet

Which Retractable Banner Stand Sizes Are Available?

The Standard Retractable is available in five listed configurations: 23 x 66 in, 24 x 81 in, 33 x 81 in, 33 x 81 in labeled Black, and 47 x 81 in. Each one is selected directly on the same product page before the insert material and optional light are chosen.

The width changes from a compact 23 or 24 in footprint to the 33 in format and the 47 in wide format. The height is 66 in on the smallest listed option and 81 in on the other four. Measure the intended floor area and vertical clearance before choosing.

The 33 x 81 in entry labeled Black is its own selection and should be recorded exactly that way on the order. Do not shorten it to 33 x 81 when reviewing the cart or proof, because the product page lists both names separately.

What Is Included With the Stand and Insert Kit?

The Stand + Insert kit includes compact aluminum hardware, two stabilizing feet, one custom printed insert, and a complimentary travel bag. It also includes a free digital proof with every order before printing and next business day production after artwork approval, so the hardware and graphic arrive as one complete display package.

The aluminum base houses the roll mechanism and printed insert. The two stabilizing feet steady the base on the floor, and the graphic hooks to the support pole for display. The travel bag holds the collapsed hardware for transport. Keep the insert aligned with the base when packing so the printed face is protected inside the cassette. Insert Only is the other material on the page: a replacement graphic for hardware you already own, so that selection ships without the stand or the travel bag.

The free digital proof included with every order covers the artwork before production. Review the finished size, insert selection, spelling, colors, logo placement, and safe area. Approval is the point that releases the job to production, so the proof should match the exact product configuration in the order.

A close view of the aluminum retractable banner base, support pole connection, and stabilizing foot

What Is the Difference Between Fabric and Matte Inserts?

The insert choice is either UV Printed Fabric or UV Printed Matte Banner. Both are available on every listed Standard Retractable size and both install in the same type of complete Stand + Insert kit. Select the material in the configurator and use the matching total from the master table.

The fabric selection uses UV printed fabric with curl-free edges. The matte option is a UV printed banner insert. Keep the selected material name with the order and proof, especially when several stands are being purchased with different artwork or sizes.

Artwork preparation remains focused on the visible panel for either material. Use the template for the selected size, maintain bleed and safe area, keep important content inside the safe area, and submit one final file for each unique printed insert.

How Does a Retractable Banner Stand Work?

A retractable banner stand stores its printed artwork on a roll inside the aluminum base. The insert pulls upward for display and connects to the support pole and top rail. When the stand is lowered, the graphic rolls back into the base, which keeps the display compact for storage and transport.

An angled studio view of a retractable display showing the printed insert, top rail, silver base, and support foot

Set the base on a level surface and position both stabilizing feet before raising the insert. Fit the fixed-height support pole into the base as directed, then pull the top rail upward in a straight path. Hook the graphic to the support pole without twisting the printed panel.

To pack the stand, disconnect the top rail while holding it securely. Guide the insert downward at a steady pace. Do not release it and let it snap into the cassette. Once the artwork is fully retracted, remove the pole from the base, return the feet to their storage position, and place the hardware in the travel bag.

How Much Does the LED Light Upgrade Cost?

One LED Light is a $118.00 priced upgrade. On the default 33 x 81 in Stand + Insert with UV Printed Fabric, changing LED LIGHT from No to 1 LED Light produces a $331.99 total. Every other selection remains at its default in that exact configuration.

The light is optional, not part of the standard kit listed in the master table. Decide whether the display location needs added illumination, then select the light on the product page. Keep the accessory choice visible in the cart so the total can be checked against the configured stand.

Do not attach an unlisted light or clamp to the printed panel. The optional product selection is intended to illuminate the display from the hardware. Route its cord so it does not cross a walking path or interfere with either stabilizing foot.

How Should Retractable Banner Artwork Be Prepared?

Retractable banner artwork should be prepared as one CMYK file with 0.25 in bleed, a 0.5 in safe area, outlined fonts, and vector art or raster images at 150 dpi minimum at final size. Keep all text and logos inside the 0.5 in safe area so nothing important lands at the edge of the printed insert.

Prioritize the top half of the banner. The upper area remains easier to see when people, furniture, or a table stand near the display. Put the main message and logo high, then use the middle for supporting information. Reserve the lower area for backgrounds or noncritical design elements.

Build on the template for the selected size. A file for 23 x 66 in is not interchangeable with one for 47 x 81 in. Extend the background through the bleed, but hold important copy inside the safe area. Outline fonts and inspect logos, QR codes, and small type at final output size.

What Should You Check Before Approving the Proof?

Before approving the proof, check the exact Stand + Insert size, insert material, LED LIGHT choice, 0.25 in bleed, 0.5 in safe area, top-half message hierarchy, spelling, colors, and image resolution. The proof and cart should describe the same configuration before production begins.

Read every line from top to bottom. Confirm that the primary message is understandable without relying on small details near the floor. Check that the logo is clear, the call to action is complete, and any QR code has enough quiet space around it.

Then compare the proof filename or job note with the physical size selected online. If several stands use different artwork, identify each file by size and message rather than by vague labels. One final CMYK file per unique insert keeps the handoff clear.

How Do You Order at the Current Price?

Order at the current price by opening the Standard Retractable product page, choosing Stand + Insert, selecting the exact size and insert, and leaving LED LIGHT at No unless the $118.00 light is wanted. Upload the matching artwork and approve the digital proof before production begins.

The opening configuration is 33 x 81 in with UV Printed Fabric and no LED light for $213.99. Record those choices with the quote rather than saving the dollar figure alone. If any selection changes, read the updated configured total before checkout.

After the proof is approved, production is the next business day. Shipping follows production. Plan the order from the approval date, then allow transit time after the stand and printed insert have been produced.

Frequently Asked Questions

A 33 x 81 in Standard Retractable Stand + Insert with UV Printed Fabric costs $213.99. The same size with UV Printed Matte Banner is $235.39. Both figures are complete kit totals with LED LIGHT set to No, and both include the hardware, printed insert, and travel bag.

The complete kit includes compact aluminum hardware, two stabilizing feet, one custom printed insert, and a complimentary travel bag. A free digital proof is included with every order before printing. Production is the next business day after artwork approval, and the finished artwork retracts into the base for protected storage and transport.

Five configurations are listed: 23 x 66 in, 24 x 81 in, 33 x 81 in, 33 x 81 in labeled Black, and 47 x 81 in. Each size can be configured with UV Printed Fabric or UV Printed Matte Banner as the insert selection.

One LED Light adds $118.00. The default 33 x 81 in Stand + Insert with UV Printed Fabric totals $331.99 with the light, compared with $213.99 when LED LIGHT is set to No. Change only the light selection to keep that comparison exact.

The printed insert rolls into the aluminum base when the display is lowered. For use, the insert pulls upward and connects to the support pole and top rail. Guide it straight while raising or lowering it, and do not let the printed surface snap uncontrolled into the cassette.

0.25 in bleed and a 0.5 in safe area are required for the CMYK artwork file. Keep text and logos inside that safe area and prioritize the top half. Outline fonts and supply vector art or raster images at 150 dpi minimum at final printed size.

Related Articles