Table Cover Sizes: Which Fit 4, 6 and 8 Foot Tables?

How do you measure a table for a cover?

Measure a rectangular table's length, width, and height, or a round table's diameter and height, before matching it to a cover. A reservation that simply says “table included” does not establish fit. Request the actual dimensions or measure the table you plan to bring.

For a rectangular tabletop, measure along both straight edges. Then measure from the tabletop to the floor with the legs fully opened. Folding tables with similar lengths can have different depths or adjustable heights. A fitted cover must follow those proportions, and a stretch cover also needs the intended table shape and leg arrangement.

For a round table, measure across the center rather than around the outside. The circumference is not the diameter. Record the height separately, especially if the event uses tall standing tables beside seated-height tables.

Keep a photo of the table with the measurements. That gives the order and artwork review a common reference. If the venue swaps tables before the event, check the replacement before assuming the same fitted cover will work.

Which throw fits a 4ft, 6ft, or 8ft table?

Choose the throw labeled for your table length (4ft for a 48-inch table, 6ft for 72 inches, 8ft for 96 inches), then confirm the 30-inch depth and height before ordering. The three open-back throws have different finished lengths, 102, 126, and 150 inches, and the same 62.25-inch depth, because the fabric must run across the top and drape over both ends.

The 4ft throw gives a short display its own proportioned cover without folding a long cover into a pile at each end. All three use 8.8 oz machine-washable polyester with hemmed edges.

All three prices in the table apply to 3-sided open-back builds. The rear remains accessible, which matters when staff sit behind the table or reach for materials underneath. Open-back coverage will not conceal storage from someone standing behind the display. If the back of the table faces an aisle, the 4-sided closed-back build, at 83.5 inches deep, covers it.

For a dedicated explanation of the largest throw, read the 8ft table throw dimensions and cost guide. This overview compares the whole range rather than replacing that product-specific guide.

Should you choose a fitted cover, stretch cover, or loose throw?

Choose by how closely the fabric should follow the table: a throw drapes, a fitted cover uses boxed corners, and a stretch cover creates a contoured presentation. The style affects both the silhouette and how forgiving the setup feels when staff move around it.

One 6ft fitted cover costs $235.39 in the 3-sided open-back configuration. It fits a 72 x 30 x 30 inch table and follows its corners rather than leaving loose folds at the ends. Choose it when that exact table shape is confirmed and a squared appearance suits the display.

One 6ft stretch cover costs $353.09. The catalog also offers an 8ft stretch size, but that is a different configuration. Do not apply the 6ft price to the larger cover or assume extra stretch makes one size universal.

The fitted, stretch, and throw comparison covers the style decision in more detail. Here, the key sizing lesson is to confirm the table first and use the matching artwork layout afterward.

What size round table cover should you order?

Order a round cover by tabletop diameter and table height; one 48-inch diameter cover for a 28-inch standard-height table costs $288.89. The standard-height build fits round tables from 31.5 to 60 inches across, with a hemmed bottom edge and 8.8 oz polyester.

Those are table-fit measurements. They should not be read as the diameter of a flat circular sheet. A finished cover needs enough fabric to travel down the sides as well as across the top, and its construction determines that relationship.

For a tall cocktail table, choose the bar-height build instead. It fits a 42-inch high round table that is 31.5 inches across, and its price shows on the product page when you select it. A standard-height cover on a bar table stops well short of the floor, so keep the top shape and height together when you order.

When is a table runner the right size choice?

A runner works when you want a printed strip over a table or existing cloth rather than a complete table covering. One 30 x 72 inch runner costs $117.69 for the runner alone. Offered runner sizes span 24 x 72 to 60 x 90 inches.

Start by deciding which direction the runner will cross the table. Its length must accommodate the path across the top and any desired front or rear drop. Its width controls how much of the table remains visible beside the artwork. The same runner can look very different when rotated.

If the base cloth already belongs to the venue, confirm its color before choosing the runner background. Contrast should make the printed panel easy to recognize without relying on a perfect color match between different fabrics.

How should artwork change with the table cover size?

Build the artwork for the selected cover's visible panels, with the main identity on the front rather than spread across every fold. A flat file includes areas that become the top, sides, and drape after installation. Centering a logo on the entire file does not necessarily center it on the front.

For proof review, identify the front edge of the table and check the logo relative to it. A useful check is to follow the brand name from the flat layout into the front-panel view. That catches placement mistakes a full-screen artwork preview can hide.

Keep small contact information away from corners where folds interrupt it. If attendees must read detailed information, put that information on a handout or tabletop holder. The cover can introduce the business while the person behind the table explains the offer.

What should you confirm before ordering a table cover?

Confirm the measured table, the cover construction, the open or closed back, and the selected artwork layout before approving the free digital proof. The custom table cover collection groups the available styles so you can choose the correct product rather than resizing an unrelated file.

Record whether the price is for a full cover or a runner only. Check that a fitted configuration matches the table dimensions, and that a round cover matches both diameter and height. Finally, plan around proof approval and shipping transit instead of assuming next-business-day production means next-business-day arrival.

Need table covers or other custom printing? Inline Graphics helps businesses, churches, schools, and event organizers across the country design and print cards, banners, signs, decals, displays, and marketing materials that get noticed. Contact us today for a quote.